Hoisting type rotary frame, both revolution and rotation, 1set of rotary frame,can fitting two kinds of fixtures, 1）one time can install 3 pieces stainless steel sheet of 1300×3100×3mm(thickness); 2) can also be coating other parts, less than 1900×3700×50mm. There are revolution, and rotation, speed is adjustable.
Stainless steel 304
2Sets of SUS304 stainless steel liner plate,thickness is 0.8mm.
2sets of JKT-1000 diffusion pump groups,contains 2pcs of ZJP-1200 Roots pumps,8pcs 2X-70pumps,2pcs 2X-30pumps,Pipe and valve use high quality steel to manufacturing.
Using far infrared stainless steel tube heater, heating power 48KW, power transmission using contactless relay; Temperature measurement using intelligent temperature control instrument to control the temperature , heating temperature 200℃.
36pcs dynamoelectric arc strike
Arc power source
36 sets maximum current 250A and operating current below 150A
Bias power source
40KW bias power supply, two gears: 1000V,40A one gear; 500V 80A another gear.
Gas charging system
4 pcs qixing huachuang mass flow controllers with a flow rate of 2000sccm.
1pc 4 channels mass flow display
1pc composite vacuum gage
Manual + automatic two types; Fully automatic Japanese Omron PLC+ 15-inch touch screen; Using special coating process system, an independent full set of complete manual system.
PVD coating layer thickness of micron scale, with thin thickness, average of 0.1 microns ~ 5 microns, the decorative coating thickness is commonly 0.1microns ~ 1 microns, so it can be almost done not affect the original size of the work-piece, raise all kinds of physical properties and chemical properties on the surface of the work-piece, and can maintain the work-piece size,No further processing is required after PVD coating.
What are the colors of PVD decorative coating that can be coated? We are able to make the color of the film has a sapphire, sky blue, ink blue, shallow golden (0.5 N gold), Japan (1) N gold, gold 24 k gold, imitation gold, champagne gold, zirconium aureate, gray, purple, IP IPS (316 l stainless steel and chromium), IPS (chromium target), rose gold (90%) of gold, rose gold (82%) of gold, rose gold gold (85%), IP black chromium (target), IP black silicon chromium (9:1), IP black (tungsten carbide), rainbow colour, light brown, brown, purple, brown, purple, sky gray, golden, light blue, etc. The color of the coating can be controlled by controlling the parameters in the coating process. After coating, the color value can be measured with relevant instruments, so that the color can be quantified to determine whether the coated color meets the requirements. The main purpose of decorative coating is to improve the decorative properties and color of the appearance of the work-piece, at the same time to make the work-piece more wear-resistant corrosion and prolong its service life; This aspect mainly applies the hardware, the building material, the clock and watch, the jewelry, the mobile phone, the electronic, the digital product, the automobile, the motorcycle, the decoration and so on.
PVD tool coating layer has TiN, TiCN, TiAlN, CrN, TiB2, DLC, AlTiN, TiAlCrN, TiAlCN, tools coating mainly for the purpose of improving surface hardness and wear resistance of work-piece, reduce the friction coefficient of surface, oxidation resistance, improve the service life of the work-piece; This aspect is mainly used in various cutting tools, turning tools (such as gear cutting tools, shaving blades, turning tools, planning tools, milling cutters, drills, cutter grains, etc.), as well as all kinds of molds (such as injection molding, die-casting, stamping, molding) and other products.
If you want to apply PVD coating surface treatment to your products, please contact us now; E-mail:firstname.lastname@example.org, our company can provide PVD coating equipment and PVD coating service.