PVD Coating And Properties

- Jan 21, 2019-

ColorFilm
HardnessOxidationFrictionThicknessTypical Applications
(Hv)(GPa)(℃)Coefficient(μm

tech_color_aip_g   
TiN2,200226000.51-4General wear resistance, wet machining
tech_color_aip_r1TiCN2,800274000.42-4General wear resistance, drilling
(with topcoat)
   tech_color_aip_r2TiCN2,800274000.42-4General wear resistance, drilling
(without topcoat)
tech_color_aip_vTiAIN2,800278000.51-4General dry machining, inserts
  tech_color_aip_vs  
AITiN3,000299000.51-4High speed dry machining
tech_color_aip_sgCrN1,800187000.41-5Mold and Dies, Cu machining, tribological   components
   tech_color_aip_ss-s 
Si added TiCrAIN bilayer3,500341,1000.55-10Cold stamping mold
tech_color_aip_ss-hfSi added TiCrAIN bilayer3,500341,1000.515-20Hot forging mold
  tech_color_aip_sd TiCrAIN3,500341,0000.41-4General machine substitute to TiAIN
tech_color_aip_sdgTICrAISiN3,600351,1000.51-4Semi-dry to dry machining (mainly end mills)
   tech_color_aip_sdg (1)Si   added TiCrAIN3,600351,1000.51-4Semi-dry to dry machining (mainly end mills)
bilayer
tech_color_aip_sdg-mrRare earth added TiCrAIN multilayer3,600351,2000.51-4High speed dry machining of hardened die steel,   Ti (dry), inconel, Waspaloy
  tech_color_aip_tl1  
Modified   AITiN2,800276000.41-4Ti machining (wet to dry)
multilayer
tech_color_aip_vs (1)AITiN multilayer3,500341,0000.51-4Drilling of carbon steel and alloy steel
微信图片_20190321134200


DLC

TypeHardnessCoefficient of FrictionThicknessApplications
(Hv)(μm)
Standard1,500-2,5000.1-0.150.5-5.0Balance of Wear Resistance, Lubricity and   Adhesion. Common Mechanical Components

High Hardness2,500-3,5000.1-0.21-5Focused on Wear Resistance. Automotive Component   Stamping Mold

Ultra High Hardness3,500-4,0000.1-0.21-4Focused on Wear Resistance under High Pressure.   For Automotive Racing use and Cutting Tools

Nano-Multi layer1,500-2,5000.1-0.151-10Balance of Wear Resistance and Lubricity,   toughness for shock resistance. Bearings, Punching Dies

Metal Doped1,000-2,0000.15-0.251-10Property changes by Metal Doping, relief of film   stress. Components, plastic injection molds.

*   Friction coefficient on iron without lubricant

zy-1713-mobile-phone-shell-magnetron37445709178

IKS PVD,high quality and good price coating machine,

iks.pvd@foxmail.com