When using the vacuum coating equipment must be controlled effectively in the process, to avoid accidents, so the safety procedures following vacuum coating vacuum coating equipment must keep in mind.
1. In the normal operation of the machine tool, when starting the machine, you must first open the pipe, the work should always pay attention to the water pressure.
2. In ion bombardment and evaporation, should pay special attention to high-voltage wire connector, not touch, in order to prevent electric shock.
3. When coating with electron gun, the aluminum plate should be outside the bell cover. It is better to use lead glass in the glass of the observation window, and lead glass glasses should be put into use in order to prevent X ray from damaging the human body.
4. The installation of multilayer dielectric film coating room, should be installed ventilation dust suction device, timely removal of harmful dust.
5. Flammable and toxic substances should be properly kept in order to prevent fire poisoning.
6. Pickling fixture should be carried out in the ventilation device, and wear rubber gloves.
7. The pickling or alkali washing bath, should be gently, no collision and spill. The pickling tank should be covered at ordinary times. 8. the work should be completed, power cut, water cut.
In order to reduce or eliminate the accidents caused by improper operation, the vacuum coating equipment must comply with the safety operation procedures when using vacuum coating equipment.