Introduction
IKS provides high-quality multi-arc targets for a wide range of applications for ferromagnetic, complex oxides, and semiconducting films. Our targets are offered in various purity levels to suit your specific requirements with the minimum purity of 99.5% up to 99.99% for pure elements and alloys.
Adopting advanced technologies such as hot isostatic pressing (HIP), vacuum sintering and vacuum melting process, our multi-arc targets are characterized by high purity, high density, homogenous composition, uniform grain size and high utilization. We monitor every step (from the raw materials to the finished products) to make sure that only high-quality targets can be shipped from our factories.
IKS manufactures all shapes and sizes of high quality multi-arc targets. Let us know the material and dimensions you need and we will meet your special requirement.
Products
Material | Symbol | Atomic Ratio | Purity | Relative Density | Stock Dimensions | Technology | Features |
Chromium | Cr | _____ | 99.5%~99.95% | >99% | Dia100xH40mm Dia95x45mm | Hot Isostatic Pressing (HIP) | Good Oxidation Resistance |
Tungsten | W | _____ | 99.9% | >99% | Dia100xH40mm Dia95x45mm | Hot Isostatic Pressing (HIP) | High Hardness |
Titanium | Ti | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | Good WearResistance |
Nickel | Ni | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | Great Corrosion Resistance |
Molybdenum | Mo | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | Great Corrosion Resistance |
Silicon | Si | _____ | 99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Sintering | High Hardness |
Silver | Ag | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | Good Electrical and Thermal Conductivity |
Tantalum | Ta | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | High Ductility |
Copper | Cu | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | Good Ductility, Thermal Conductivity and Corrosion Resistance |
Graphite | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Sintering | High Hardness | |
Aluminum | Al | _____ | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Vacuum Melting | Good Ductility,Thermal Conductivity and Corrosion Resistance |
Silicon-Aluminum | SiAl | 25/75 30/70 40/60 50/50 | 99.9%~99.99% | >99% | Dia100xH40mm Dia95x45mm | Hot Isostatic Pressing (HIP) | High Ductility and Good Wear Resistance |
Titanium-Aluminum | TiAl | 30/70 33/67 40/60 45/55 50/50 60/40 70/30 75/25 80/20 | >99.7% (2N7) | >99% | Dia100x40/95x32mm | Hot Isostatic Pressing (HIP) | High Mechanical Strength and Good Corrosion Resistance |
Chromium-Aluminum | CrAl | 25/75 30/70 40/60 50/50 | >99.7% (2N7) | >99% | Dia100x40/95x32mm Dia63x40/65x32mm | Hot Isostatic Pressing (HIP) | Good Oxidation Resistance and Corrosion Resistance |
Titanium-Aluminum-Silicon | TiAlSi | 30/60/10 40/50/10 | >99.7% (2N7) | >99% | Dia100x40/95x32mm Dia63x40/65x32mm | Hot Isostatic Pressing (HIP) | High Hardness and Ductility |
Chromium-Aluminum-Silicon | CrAlSi | 30/60/10 40/50/10 | >99.7% (2N7) | >99% | Dia100x40/95x32mm Dia63x40/65x32mm | Hot Isostatic Pressing (HIP) | Good Oxidation Resistance and Corrosion Resistance |
More information
Certification: ISO9001
Average Grain Size: 30-40μm (national standard is 100μm)
Other special specifications are available on customer’s request.
Quality Analysis of CrAl Sputtering Target
(Take CrAl 30/70 at% as a sample)
| Main component (wt%) | Impurity content (%) | |||||
CrAl | C | N | O | Fe | Si | S |
>99.7 | 0.01 | 0.006 | 0.17 | 0.02 | 0.07 | 0.002 |
Cr | Al | |||||
balance | 54.75 | |||||
Dimension: Dia 65x40 mm
True density: 3.764(g/cm3)
Theoretical density: >99%
The average grain size of our multi-arc target is 30-40μm which is far below the national standard (100μm).
The IKS Advantages
◆Variety of materials including: Silver, Titanium, Aluminum, Silicon, Silicon-Aluminum Titanium-Aluminum-Silicon, Graphite and so on to suit your requirements.
◆ Extremely high material utilization (about 80%) ensures lower consumption of raw materials and save your costs.
◆ Provide thick & dense film with extremely smooth surface.
◆ Multi-layer films & multi process films are possible
◆ Ensure the high efficiency of coating process and availably increase the throughput of the coating machine.
Application
◆ Tool and moulds surface treatment
◆ Architectural and auto glass
◆ Hardware and decoration
◆ Flat panel display
◆ Solar photovoltaic
◆ Other fields
Our cathodic arc targets are best choice for providing hard surfaces with excellent corrosion resistance and wear resistance for cutting tools, punching and forming moulds to increase their service time, give them the higher feed speeds, cutting performance and metal removal rates can be achieved easily.
Packing: 1. Wooden box
2. Carton
3. As your request
Payment: T/T, L/C, etc.
Delivery time: Normally 20~30 days after payment
Shipping: By air or by sea